Zooms New Flagship Field Recorder.
Filmmakers and sound professionals know the importance of sharp, clean audio in storytelling. From the click of a seatbelt to the roar of an engine, the F8n Pros 8 inputs capture full dynamic range using 32-bit float technology.
Features of the F8n Pro – 32-bit float recording technology – 8-channel/10-track field audio recorder/mixer – Records in BWF-compliant WAV format up to 192kHz/32-bit float – 8 discrete inputs with locking Neutrik XLR/TRS combo connectors – High quality mic preamps with up to 75 dB gain and less than -127 dBu EIN – Switchable +4dB inputs with mic/line options for both XLR and TRS – Accurate Time Code (0.2 ppm when on and up to 0.2 ppm when powered off) I/O on standard BNC connectors; dropframe/non-drop formats with Jam Sync – Zoom AutoMix software – Three different power supply options: 8x AA batteries, external DC battery pack with Hirose connector, or 12V AC adapter (AAs and DC battery pack not included) – High pass filter, phase invert, and mid-side decoder – Dual mini-XLR (TA3) balanced Main Outs plus ” stereo mini-jack Sub Out – Dedicated headphone output (100 mW) with front panel volume control – 2.4″ full-color backlit LCD with monochromatic mode – Dual SD/SDHC/SDXC card slots, up to 1 TB each – Use as an 8-in/4-out USB audio interface – Free Zoom F8 Control App for iOS and Android allows wireless remote control,file renaming, and metadata entry
SpecsINPUTSINPUT 1 – 8 Connectors: XLR/TRS combo jacks (XLR: 2 hot, TRS: TIP hot)Input source set to Mic Input gain: +10 +75 dB Input impedance: 3 k or more Maximum input level: +4 dBu (at 0 dBFS) Phantom power: +24/+48 V, 10 mA maximum per channelEquivalent input noise 127 dBu or less (A-weighted, +75 dB input gain, 150 input)Frequency response 20 Hz 60 kHz, +0.5 dB/1 dB (192 kHz sample rate)A/D dynamic range 113 dB typ. (60 dBFS input, A-weighted)Crosstalk 90 dB or less (between adjacent channels, 1 kHz)MIC IN ZOOM mic capsule input (use disables Inputs 1/2)SLATE MIC Built-in mic for voice memos can be assigned to tracks freelyOUTPUTSMAIN OUT 1/2 Connectors: TA3 connectors (balanced output, 2: hot) Output impedance: 150 or less Reference output level: 10 dBV (normal output level) +4 dBu (line output level) 1 kHz, 600 load Maximum output level: +10 dBV (normal output level) +24 dBu (line output level) 1 kHz, 600 loadSUB OUT 1/2 Connectors: 3.5 mm stereo mini (unbalanced output) Output impedance: 100 or less Reference output level: 10 dBV (normal output level) 40 dBu (mic output level) 1 kHz, 10 k load Maximum output level: +10 dBV (normal output level)HEADPHONE Connector: 1/4 inch stereo (unbalanced output) Output impedance: 18 or less Maximum output level: 100 mW + 100 mW (32 load)D/A dynamic range 105 dB typ. (60dBFS input, A-weighted)RECORDING MEDIA Dual SD card slots: SDHC cards: 4 GB 32 GB SDXC cards: 64 GB 1 TBRECORDING FORMATSWhen WAV selected Supported formats: 44.1, 47.952, 48, 48.048, 88.2, 96 and 192 kHz 16-bit linear, 24-bit linear and 32-bit float Mono/stereo/2-10 ch polyBWF and iXML Maximum simultaneous recording tracks: 10 (8 inputs + stereo mix) 8 (at 192 kHz sampling rate)When MP3 selected Supported formats: 128, 192 and 320 kbps 44.1 and 48 kHz ID3v1 tags Maximum simultaneous recording tracks: 2RECORDING TIME Using a 32GB card: 23:08:00 (48 kHz/32-bit float stereo WAV) 5:47:00 (192 kHz/32-bit float stereo WAV)TIMECODE Connector: BNC Modes: Off, Int Free Run, Int Record Run, Int RTC Run, Ext and Ext Auto Rec (audio clock can be synchronized to timecode) Frame rates: 23.976ND, 24ND, 25ND, 29.97ND, 29.97D, 30ND and 30D Precision: 0.2 ppm Supported input levels: 0.2 – 5.0 Vpp Input impedance: 4.6 k Output level: 3.3 Vpp Output impedance: 50 or lessPOWER SUPPLIES AA batteries: 8 (alkaline, nickel-metal hydride or lithium) AC adapter: ZOOM AD-19, DC 12 V/2 A, center plus External DC power supply: HIROSE HR10A-7R-4S 4-pin connector (1 pin: -, 4 pin: +), 918VESTIMATED CONTINUOUS RECORDING TIMES:* These values are only estimates. 2 channels to SD 1 48kHz sampling frequency (32-bit float/16-bit linear/24-bit linear) MAIN/SUB OUT OFF, TIMECODE OFF, LED/LCD brightness 5, 32 headphones, PHANTOM OFF Alkaline batteries: about 7 hours* These values are based on in-house testing methods. NiMH batteries (2500 mAh): about 8 hours* They will vary greatly according to use conditions. Lithium batteries: about 13.5 hours 8 channels to SD 1 48kHz sampling frequency (32-bit float/16-bit linear/24-bit linear) MAIN/SUB OUT OFF, TIMECODE OFF, LED/LCD brightness 5, 32 headphones, PHANTOM OFF Alkaline batteries: about 4.5 hours – NiMH batteries (2500 mAh): about 6 hours – Lithium batteries: about 9.5 hours 8 channels to SD 1/2 192kHz sampling frequency (32-bit float/16-bit linear/24-bit linear) MAIN/SUB OUT ON, TIMECODE Int Free Run, LED/LCD brightness 60, 32 headphones, PHANTOM 48 V Alkaline batteries: about 0.5 hours – NiMH batteries (2500 mAh): about 1 hour – Lithium batteries: about 2 hoursDISPLAY – 2.4 inch full-color LCD (320 240)USB Connector: Mini-B – * Use a USB cable that supports data transfer. – * USB bus power operation is not supported.Mass Storage Operation Class: USB 2.0 High SpeedMulti Track audio interface mode operation (driver required for Windows, not required for Mac) Class: USB 2.0 High SpeedSpecifications:– Sampling rate: 44.1/48/88.2/96 kHz – Bit depth: 24-bit linear/32-bit float – 8-in/4-outStereo Mix audio interface mode operation (no driver required) * Supports audio interface operation with iOS/iPadOS devices Class: USB 2.0 Full Speed Specifications: Sampling rate: 44.1/48 kHz – Bit depth: 16-bit linear – 2-in/2-outAudio interface operation with recording (driver required for Windows, not required for Mac) Class: USB 2.0 High Speed Specifications: Sampling rate: 44.1/48 kHz – Bit depth: 24-bit linear/32-bit float – 10-in/4-outPower consumption: 15 WExternal dimensions: 7.0 in. (W) 5.5 in. (D) 2.1 in. (H)Weight: (including batteries) 1200 gNote: 0 dBu = 0.775 Vrms
Unconditional Satisfaction Guarantee
